Positive Aspects of Valid Dumps 300-425 Exam Dumps! [Jul-2023]

First Attempt Guaranteed Success in 300-425 Exam 2023

NEW QUESTION # 21
Clustering Cisco WLCs into a single RF group enables the RRM algorithms to scale beyond the capabilities of a single Cisco WLC. How many WLC and APs in an RF group can the controller software scale up to in WLC release 8.9 depending on the platform?

• A. up to 20 WLCs and 1000 APs
• B. up to 20 WLCs and 6000 APs
• C. up to 20 WLCs and 3000 APs
• D. up to 20 WLCs and 4000 APs

Answer: B

Explanation:

https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-9/config-guide/b_cg89/radio_resource_management.html

NEW QUESTION # 22
A customer has two Cisco 550B WLCs that manage all the access points in their network and provide N+1 redundancy and load balancing. The primary Cisco WLC has 60 licenses and the secondary Cisco WLC has
40. The customer wants to convert the N+1 model to an HA model and provide SSO. Configuration must be performed during a maintenance window. After performing all the configurations on both controllers, the config redundancy unit secondary command is issued on the secondary Cisco WLC and it fails. Which parameter needs to be in place to complete the configuration?

• A. A cable in the RP port
• B. The primary Cisco WLC is already set as the secondary unit.
• C. SSO needs to be enabled
• D. The secondary Cisco WLC needs a minimum of 50 base licenses

Answer: D

Explanation:

NEW QUESTION # 23
An engineer has deployed a group of APs in an auditorium and notices that the APs are showing high cochannel interference. Which profile can be used to adjust the parameters for these high-density APs?

• A. AVC profile
• B. RF profile
• C. ISE profile
• D. QoS profile

Answer: B

Explanation:

NEW QUESTION # 24
Refer to the exhibit.

Which two statements about Cisco Prime Infrastructure are true? (Choose two.)

• A. It shows the map editor feature in Cisco Prime Infrastructure.
• B. Planning mode requires a special license in Cisco Prime Infrastructure.
• C. Controllers must be synchronized with Cisco Prime Infrastructure for planning mode to work.
• D. It presents the recommended number of APs for the selected coverage area based on the selections made.
• E. It shows the planning mode feature in Cisco Prime Infrastructure.

Answer: C,E

Explanation:

NEW QUESTION # 25
What is the recommended cell overlap when designing a wireless network for Cisco Hyperlocation?

• A. 20%
• B. 30%
• C. 40%
• D. 50%

Answer: A

Explanation:

NEW QUESTION # 26
Refer to the exhibit. An enterprise is using wireless as the main network connectivity for clients. To ensure service continuity. a pair of controllers will be installed in a datacentre. An engineer is designing SSO on the pair of controllers. What needs to be included in the design to avoid having the secondary controller go into maintenance mode?

• A. The Global Configuration of SSO is set to Disabled on the controller.
• B. The Keep alive timer is too low. which causes synchronization problems.
• C. The connection between the redundancy ports is missing.
• D. The redundancy port must be the same subnet as the redundancy mgmt.

Answer: C

Explanation:
'There are few scenarios where the Standby WLC may go into Maintenance Mode and not be able to communicate with the network and peer: * Non reachability to Gateway via Redundant Management Interface * WLC with HA SKU which had never discovered peer * Redundant Port is down * Software version mismatch (WLC which boots up first goes into active mode and the other WLC in Maintenance Mode)' High Availability (SSO) Deployment Guide - Cisco

NEW QUESTION # 27
A technician connects a Cisco Aironet 3700 Series access point to a switch and realizes that the AP is coming up with 3x3 MIMO. Which reason explains this behavior?

• A. A redundant power supply is unavailable on the switch.
• B. The AP is getting power from a power injector.
• C. The switch is PoE+ capable.
• D. The switch is 802.3af capable.

Answer: D

Explanation:

NEW QUESTION # 28
An engineer has successfully configured high availability and SSO using two Cisco 5508 Wireless LAN Controllers. The engineer can access the Active Primary WLC, but the Secondary Standby WLC is not accessible. Which two methods allow access to the standby unit? (Choose two.)

• A. SSH to the redundancy management interface of the primary WLC
• B. SSH to the management interface of the primary WLC
• C. SSH to the service port interface
• D. via the console connection
• E. SSH to the virtual interface of the secondary WLC

Answer: C,D

Explanation:

NEW QUESTION # 29
A rapidly expanding company has tasked their network engineer with wirelessly connecting a new cubicle area with Cisco workgroup bridges until the wired network is complete. Each of 42 new users has a computer and VoIP phone. How many APs for workgroup bridging must be ordered to keep cost at a minimum while connecting all devices?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: C

Explanation:
Explanation

So, each AP will have 25 clients. Minimum 4 APs are sufficient.

NEW QUESTION # 30
Multiple WLCs are implemented in a high-availability configuration in a mobility group. APs are deployed with only a primary controller assigned. By default, which mobility group member controller do the orphaned APs join in the event of a failed controller?

• A. controller with the lowest percent of associated APs per license capacity
• B. controller with the least number of associated APs
• C. controller with the most available AP free license capacity
• D. controller with the least CPU utilization over the last reporting period

Answer: B

Explanation:
https://mrncciew.com/2013/04/07/ap-failover/

NEW QUESTION # 31
An engineer must decide the cell overlap for a wireless voice deployment. Which Cisco measurement recommendation should be considered?

• A. One AP should be deployed per 3000 square feet.
• B. The measurement should be done on the 2.4-GHz band.
• C. The edge of the cell should be below 35 RSSI.
• D. The edge of the cell should be -67 dBm.

Answer: D

Explanation:

NEW QUESTION # 32
A user is having issues accessing file shares on a network. The network engineer advises the user to open a web browser, input a prescribed IP address, and follow the instructions. After doing this, the user is able to access company shares. Which type of remote access did the engineer enable?

• A. SSL VPN client access
• B. VPDN client access
• C. Ipsec VPN client access
• D. EZVPN

Answer: A

Explanation:
The Cisco AnyConnect VPN Client provides secure SSL connections to the security appliance for remote users. Without a previously installed client, remote users enter the IP address in their browser of an interface configured to accept SSL VPN connections. Unless the security appliance is configured to redirect http:// requests to https://, users must enter the URL in the form https://<address>.
After entering the URL, the browser connects to that interface and displays the login screen. If the user satisfies the login and authentication, and the security appliance identifies the user as requiring the client, it downloads the client that matches the operating system of the remote computer. After downloading, the client installs and configures itself, establishes a secure SSL connection and either remains or uninstalls itself (depending on the security appliance configuration) when the connection terminates.
Reference: http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation- firewalls/100936-asa8x-split-tunnel-anyconnect-config.html

NEW QUESTION # 33
Clustering Cisco WLCs into a single RF group enables the RRM algorithms to scale beyond the capabilities of a single Cisco WLC. How many WLC and APs in an RF group can the controller software scale up to in WLC release 8.9 depending on the platform?

• A. up to 20 WLCs and 1000 APs
• B. up to 20 WLCs and 6000 APs
• C. up to 20 WLCs and 3000 APs
• D. up to 20 WLCs and 4000 APs

Answer: B

Explanation:
Explanation

https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-9/config-guide/b_cg89/radio_resource_management

NEW QUESTION # 34
Which Cisco VPN technology uses AAA to implement group policies and authorization and is also used for the XAUTH authentication method?

• A. GREVPN
• B. Cisco Easy VPN
• C. GETVPN
• D. DMVPN

Answer: B

NEW QUESTION # 35
What causes the most signal attenuation, based on the wireless design tools?

• A. glass wall
• B. cinder block wall
• C. metal door
• D. office window

Answer: C

Explanation:

NEW QUESTION # 36
A company has 10 access point licenses available on their backup Cisco WLC and their primary Cisco WLC is at full capacity, 5 access points are set to high failover priority and 7 access points are set to critical failover priority. During a failure, not all critical access points failed over to the backup Cisco WLC. Which configuration is the cause of this issue?

• A. The high priority access point is oversubscribed.
• B. The critical priority access point count is oversubscribed.
• C. network ap-priority is set to enable.
• D. network ap-priority is set to disable.

Answer: D

Explanation:
https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2016/pdf/BRKCOL-2275.pdf

NEW QUESTION # 37
An engineer has deployed a group of APs m an auditorium and notices that the APs are showing high co-channel interference Which profile is used to adjust the parameters for these high-density APs?

• A. AVC profile
• B. RF profile
• C. ISE profile
• D. QoS profile

Answer: B

Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-7/b_wireless_high_client_density_design_guide.html

NEW QUESTION # 38
Which UDP port numbers are used for exchange mobility packets in an AireOS wireless deployment?

• A. UDP 16667 for control plane, UDP 16666 for data plane
• B. UDP 16666 for control plane, UDP 16667 for data plane
• C. UDP 16668 for control plane, UDP 16667 for data plane
• D. UDP 16666 for control plane, EoIP (IP protocol 97) for data plane

Answer: B

Explanation:

NEW QUESTION # 39
How are mobility groups created, excluding mobility anchors?

• A. If WLCs with HA SSO are deployed, each WLC in the WLC HA pair is considered separately as a mobility peer.
• B. Each WLC must use the same mobility domain name and be defined as a peer in each other' s static mobility members list.
• C. A mobility group does not require ell WLCs in the group lo use the same virtual IP address.
• D. The WLGs do not have to be of the same model or type to be a member of a mobility group, however each member should be running different software versions.

Answer: A

NEW QUESTION # 40
The wireless team must configure a new voice SSID for optimized roaming across multiple WLCs with Cisco 8821 phones. Which two settings accomplish this goal? (Choose two.)

• A. Configure mobility groups between WLCs.
• B. Use AVC to tag traffic voice traffic as best effort.
• C. Configure AP groups between WLCs.
• D. Configure AVC profile on new SSID.
• E. Use Cisco Centralized Key Management for authentication.

Answer: B,E

NEW QUESTION # 41
An engineer has configured guest anchoring for a newly created SSD however, the mobility tunnels are not up, and EPING is failing from the foreign WLC to the anchor WLC. Which traffic flow must be allowed at the firewall to enable the communication?

• A. IP protocol 97
• B. UDP port 16666
• C. TCP port 97
• D. UDP port 97

Answer: B

Explanation:

NEW QUESTION # 42
Refer to the exhibit.

What is the main reason why the Wi-Fi design engineer took a different approach than installing the APs in the offices, even though that installation provides better coverage?

• A. antenna gain
• B. aesthetics
• C. transmit power considerations
• D. power supply considerations

Answer: C

NEW QUESTION # 43
......

Certification in Cisco 300-425 provides many benefits to network engineers and architects. Designing Cisco Enterprise Wireless Networks certification validates their knowledge and skills in designing and deploying Cisco Enterprise Wireless Networks, which can help them advance their careers and increase their earning potential. Additionally, certification holders can demonstrate their ability to manage and troubleshoot wireless networks, which can help them gain the trust and respect of their peers and employers. Ultimately, certification in Cisco 300-425 is a valuable credential for anyone who works with wireless technologies and wants to demonstrate their expertise in this area.

To pass the Cisco 300-425 Exam, candidates need to demonstrate their understanding of the principles and best practices of designing wireless networks, as well as their ability to apply that knowledge in real-world scenarios. 300-425 exam consists of multiple-choice questions, simlets, and testlets that assess the candidate's knowledge and skills in various aspects of wireless networking. Candidates who pass the exam will be certified as Cisco Certified Specialist - Enterprise Wireless Design, and they will be able to demonstrate their expertise in designing enterprise-level wireless networks.

 

Practice LATEST 300-425 Exam Updated 113 Questions: https://examtorrent.braindumpsit.com/300-425-latest-dumps.html