Download Free Nutanix NCP-MCI-5.20 Exam Questions & Answer 

Online VALID NCP-MCI-5.20 Exam Dumps File Instantly

The Nutanix NCP-MCI-5.20 certification is an excellent opportunity for IT professionals to enhance their skills in managing and deploying multi-cloud infrastructures. The certification is recognized globally and is highly respected by employers. The exam is comprehensive and covers a wide range of topics, making it an effective way to test the candidate's knowledge and skills in multi-cloud infrastructure deployment, management, and troubleshooting.

 

NEW QUESTION # 90
An administrator needs to take a single node down for maintenance. Which two steps should the administrator take? (Choose two)

• A. Reclaim the licenses to the Nutanix Support Portal.
• B. Make sure Auto Evacuation is enabled
• C. Shut down or live migrate all VMs off of the node.
• D. Verify the data resiliency status of the cluster.

Answer: C,D

Explanation:
https://portal.nutanix.com/page/documents/details/?targetId=AHV-Admin-Guide-v51:AHV-Admin-Guide-v51

NEW QUESTION # 91
What policy would maximize throughput for the brO uplink of a host?

• A. Route based on ip hash
• B. Active-Active
• C. Switch Dependent, Dynamic
• D. Active-Backup with MAC pinning

Answer: B

NEW QUESTION # 92
An administrator wants to have a VM on an AHV cluster with access to multiple VLANs. What is the most efficient way to achieve this?

• A. Use one vNIC per VLAN for the VM.
• B. Use SFPs that allow the needed VLANs.
• C. Update a vNIC on the VM to operate in trunked mode for all desired VLANs.
• D. Create a network in AHV associated with all those VLANs on all hosts.

Answer: C

NEW QUESTION # 93
What action should an administrator take to verify the ability to receive email alerts from a Nutanix cluster?

• A. Click the test button on the SMTP configuration.
• B. Add an email address to the alert configuration list.
• C. Click the configuration for SNMP and add a destination.
• D. Pull the first SSD out of the node.

Answer: C

NEW QUESTION # 94
the analysis dashboard allows you to create which 2 type of charts? (Choose two)

• A. entity (vm,host,disk,memory,etc.)
• B. open support cases
• C. metric (IOPS, sequential reads, etc).
• D. out-of-band management

Answer: A,C

NEW QUESTION # 95
In what order does Nutanix recommend that components be upgraded on a single cluster?

• A. AOS, AHV. LCM, NCC, Foundation
• B. NCC Foundation, AOS, LCM, AHV
• C. Foundation, LCM, NCC AOS, AHV
• D. LCM, AOS, AHV. NCC Foundation

Answer: D

NEW QUESTION # 96
An administrator wants to use Volumes to connect to physical servers that are not able to be virtualized.
Which three things must be configured for Volumes to support iSCSI clients? (Choose three)

• A. Enable external client access
• B. Cluster Virtual IP address
• C. Data Services IP address
• D. iSCSI Multipathing I/O
• E. Client OS iSCSI initiator

Answer: B,C,E

Explanation:
https://portal.nutanix.com/page/documents/details/?targetId=Web-Console-Guide-Prism-v51:wc-block-services-c.html

NEW QUESTION # 97
Which options are available when a live migration is performed on a VM in an AOS 5.5 implementation?

• A. the VM can be moved to a different host and a different storage container
• B. the VM can be moved to a different (remote) site
• C. the VM can be moved to a different storage container
• D. The VM can be moved on a different host

Answer: D

NEW QUESTION # 98
After an unplanned primary site outage, an administrator Activates a protection domain at the backup site.
Which steps must the administrator perform to bring the production VMs back up at the primary site?

• A. 1. Log into Prism Element on the backup site
  2. Navigate to the DR tab and select the protection domain
  3. Click Migrate
  4. Power on VMs
• B. 1. Log into the CVM on the backup site
  2. Power down VMs that are running in DR Mode
  3. Log into Prism Element on the primary site
  4. Power on VMs
• C. 1. Log into the CVM on the primary site
  2. Deactivate and destroy VMs
  3. Log into the backup site, choose the Protection Domain and click Migrate
  4. Power on VMs
• D. 1. Log into Prism Element on the primary site
  2. Navigate to the DR tab and choose the protection domain
  3. Click Migrate
  4. Power on VMs

Answer: A

NEW QUESTION # 99
A two-node ROBO cluster is configured with a witness VM.

What happens when Node A goes down?

• A. The- cluster becomes unavailable and goes into read-only mode.
• B. All operations and services on the Node B are shut down and go into a waiting state.
• C. The cluster is unaffected and no administrator intervention is required.
• D. Node B sends a leadership request to the Witness VM and goes into single-node mode.

Answer: D

NEW QUESTION # 100
An Administrator is working on a one-node ROBO cluster configurations
Which statement is true for this configuration?

• A. Supported hardware is NX-1175-G5 and G6
• B. the minimum RPO 8 hours required
• C. Witness vm required to break cluster quoram
• D. witness vm should be 8vcp and 20gb ram

Answer: A

NEW QUESTION # 101
Where are Leap Availability Zones configured?

• A. Prism Central
• B. Prism Element
• C. Controller VM
• D. Cloud Connect

Answer: A

Explanation:
Terminology
Availability Zone - it is represented by all resources (Nutanix Clusters) connected to Prism Central or Xi Leap Availability zone. Depends on the architecture, Availability zone can represent geographic territory, datacenter or server room in the datacenter. Protection policies - in protection policies you set up (RPO, Retention), rules to auto-apply policies to virtual machines
https://vmwaremine.com/2019/02/08/nutanix-leap-runbooks-part-1/#sthash.VwrzSzhQ.dpbs

NEW QUESTION # 102
Which prism dashboard should an administrator use to set the frequency of NCC?

• A. cluster health
• B. Alerts
• C. data protection
• D. Tasks

Answer: A

NEW QUESTION # 103
What should be validated as part of the customer's troubleshooting process?

• A. The VLAN has the proper gateway configured in the network settings in Prism.
• B. The VLAN is configured on the trunk of the upstream switch.
• C. The VLAN is unique to the Nutanix cluster, and not in use elsewhere in the network.
• D. The VLAN has been configured to use the proper bridge.

Answer: A

NEW QUESTION # 104
Which service performs snapshots in an AOS 5.15 implementations?

• A. Prism
• B. Stargate
• C. Zookeeper
• D. Medusa

Answer: D

NEW QUESTION # 105
When host affinity policies are enabled, how does this affect the AHV cluster?

• A. The VM-host affinity cannot be applied on a cluster that has HA reservations configured.
• B. Host affinity rules do not affect any other aspects of the AHV cluster.
• C. Metro Availability will no longer work as designed and will result in Split Brain.
• D. Micro segmentation rules will not be applied to VMs with affinity policies set on them.

Answer: B

Explanation:
https://portal.nutanix.com/page/documents/details/?targetId=Prism-Central-Guide-Prism-v5_17:mul-ahv-affinity-policies-pc-c.html

NEW QUESTION # 106
Which three drivers are included in the Nutanix virtio package? (choose three)

• A. NIC Drivers
• B. USB driver
• C. SCSI drivers
• D. memory Balloon driver
• E. Video driver

Answer: A,C,D

NEW QUESTION # 107
An administrator needs to power down an AHV node in order to replace a failed DIMM?
Which step should the administrator take after placing the node into maintenance mode?

• A. Shut Down the nutanix CVM
• B. Reboot the Nutanix CVM
• C. Power of the node
• D. Execute the command cluster status

Answer: A

NEW QUESTION # 108
Which two factors should be considered when planning to migrate VMs to AHV? (Choose two.)

• A. iSCSI MPIO Version
• B. Guest Operating System
• C. Downtime Requirements
• D. Active Directory Domain

Answer: A,C

NEW QUESTION # 109
what command is used to run the nutanix cluster checks from the CVM CLI?

• A. ncc health_check run_all
• B. ncc run_all_health_check
• C. ncc check_health run_all
• D. ncc check_all health_options

Answer: A

NEW QUESTION # 110
An administrator is restarting a node and the CVM has not automatically restarted.
Which command should be used to start the CVM?

• A. cvm start block-ID-(Node Letter)
• B. virsh start block-ID-(Node Letter)
• C. virsh start cvm name
• D. cvm start cvm_name

Answer: C

NEW QUESTION # 111
An administrator cables all interfaces on a newly added AHV host and starts migrating VM to 4. Users report that network connections are much slower to the VMs after the migration.
What is a possible reason for this issue.?

• A. The network is slower because the host is further away.
• B. The CVM on the node has not fully joined
• C. The VMs do not use the same interfaces as the CVM.
• D. The host still has the default bond configuration.

Answer: D

NEW QUESTION # 112
An administrator is configuring NTP for Nutanix cluster.
How many NTP sources must they configure to identify a false ticker and provide redundancy?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: B

NEW QUESTION # 113
An administrator has a 4-node Nutanix cluster running on AHV. The administrator creates a new storage container and makes that all available to all hosts.
Which storage protocol is used for Virtual Machines to access virtual disks on the storage container?

• A. Fiber Channel
• B. iSCSI
• C. NFS
• D. SMB/CIFS

Answer: B

NEW QUESTION # 114
......

The Nutanix NCP-MCI-5.20 certification exam focuses on enterprise-grade technologies that are designed to streamline IT operations, reduce costs, and improve agility. The exam covers various topics such as multi-cloud architecture, virtualization, networking, security, storage, and automation. Passing this certification exam demonstrates that an IT professional has the skills and knowledge required to deploy and manage a multi-cloud infrastructure using Nutanix technology. It also validates the ability to provide solutions that meet the requirements of modern businesses, including scalability, reliability, and security.

The Nutanix NCP-MCI-5.20 Certification Exam is an industry-standard certification that measures the candidate's knowledge and skills in managing Nutanix multi-cloud infrastructure. The exam covers a wide range of topics, including architecture, deployment, configuration, management, and troubleshooting. This certification is ideal for IT professionals who want to advance their careers and demonstrate their expertise in multi-cloud infrastructure to employers and clients.

 

NCP-MCI-5.20 Exam Dumps For Certification Exam Preparation: https://examtorrent.braindumpsit.com/NCP-MCI-5.20-latest-dumps.html